Stainless Steel Hollow Bar Weights And Dimensions
ASTM A511 STAINLESS STEEL HOLLOW BAR
| Code No | O.D in | I.D in | Guaranteed component sizes Chucked true to the O.D. | Chucked true to the I.D | Weight lb/ft |
|---|
| Ma. O.D in. | Min. I.D
in. | Ma. O.D in. | Min. I.D in. |
|
|---|
| 32/20 | 1.26 | 0.79 | 1.22 | 0.86 | 1.19 | 0.83 | 2.82 |
| 32/16 |
| 0.63 | 1.22 | 0.71 | 1.18 | 0.67 | 3.41 |
|
|
|
|
|
|
|
|
| 36/25 | 1.42 | 0.98 | 1.38 | 1.06 | 1.34 | 1.02 | 3.06 |
| 36/20 |
| 0.79 | 1.38 | 0.87 | 1.34 | 0.83 | 3.97 |
| 36/16 |
| 0.63 | 1.38 | 0.71 | 1.33 | 0.67 | 4.56 |
|
|
|
|
|
|
|
|
| 40/28 | 1.57 | 1.10 | 1.54 | 1.18 | 1.50 | 1.14 | 3.69 |
| 40/25 |
| 0.98 | 1.54 | 1.06 | 1.50 | 1.02 | 4.35 |
| 40/20 |
| 0.79 | 1.54 | 0.87 | 1.49 | 0.83 | 5.26 |
|
|
|
|
|
|
|
|
| 45/32 | 1.77 | 1.26 | 1.73 | 1.33 | 1.70 | 1.30 | 4.50 |
| 45/28 |
| 1.10 | 1.73 | 1.18 | 1.69 | 1.14 | 5.49 |
| 45/20 |
| 0.79 | 1.73 | 0.87 | 1.69 | 0.83 | 7.06 |
|
|
|
|
|
|
|
|
| 50/36 | 1.97 | 1.42 | 1.93 | 150 | 1.89 | 1.46 | 5.38 |
| 50/32 |
| 1.26 | 1.93 | 1.34 | 1.89 | 1.30 | 6.52 |
| 50/25 |
| 0.98 | 1.93 | 1.07 | 1.88 | 1.02 | 8.13 |
|
|
|
|
|
|
|
|
| 56/40 | 2.20 | 1.57 | 2.17 | 1.65 | 2.13 | 1.61 | 6.85 |
| 56/36 |
| 1.42 | 2.17 | 1.50 | 2.12 | 1.46 | 8.13 |
| 56/28 |
| 1.10 | 2.17 | 1.19 | 2.11 | 1.14 | 10.2 |
|
|
|
|
|
|
|
|
| 63/50 | 2.48 | 1.97 | 2.44 | 2.04 | 2.41 | 2.01 | 6.66 |
| 63/40 |
| 1.57 | 2.44 | 1.66 | 2.39 | 1.61 | 10.3 |
| 63/36 |
| 1.42 | 2.44 | 1.51 | 2.39 | 1.46 | 11.6 |
| 63/32 |
| 1.26 | 2.44 | 1.35 | 2.39 | 1.30 | 12.8 |
| 71/56 | 2.80 | 2.20 | 2.75 | 2.28 | 2.71 | 2.24 | 8.67 |
| 71/45 |
| 1.77 | 2.75 | 1.86 | 2.70 | 1.81 | 13.2 |
| 71/40 |
| 1.57 | 2.75 | 1.67 | 2.70 | 1.61 | 15.0 |
| 71/36 |
| 1.42 | 2.75 | 1.52 | 2.69 | 1.46 | 16.2 |
|
|
|
|
|
|
|
|
| 75/40 | 2.95 | 1.57 | 2.91 | 1.67 | 2.85 | 1.61 | 17.5 |
|
|
|
|
|
|
|
|
| 80/63 | 3.15 | 2.48 | 3.10 | 2.56 | 3.06 | 2.52 | 11.0 |
| 80/50 |
| 1.97 | 3.10 | 2.06 | 3.05 | 2.01 | 17.0 |
| 80/45 |
| 1.77 | 3.10 | 1.87 | 3.04 | 1.81 | 19.0 |
| 80/40 |
| 1.57 | 3.10 | 1.68 | 3.04 | 1.61 | 20.8 |
|
|
|
|
|
|
|
|
| 85/45 | 3.35 | 1.77 | 3.30 | 1.87 | 3.23 | 1.81 | 22.5 |
|
|
|
|
|
|
|
|
| 90/71 | 3.54 | 2.80 | 3.49 | 2.88 | 3.45 | 2.84 | 13.8 |
| 90/63 |
| 2.48 | 3.49 | 2.57 | 3.44 | 2.52 | 18.2 |
| 90/56 |
| 2.20 | 3.49 | 2.30 | 3.43 | 2.24 | 21.7 |
| 90/50 |
| 1.97 | 3.49 | 2.07 | 3.43 | 2.01 | 24.3 |
|
|
|
|
|
|
|
|
| 95/50 | 3.74 | 1.97 | 3.68 | 2.07 | 3.61 | 2.01 | 28.3 |
|
|
|
|
|
|
|
|
| 100/80 | 3.94 | 3.15 | 3.88 | 3.24 | 3.83 | 3.20 | 16.4 |
| 100/71 |
| 2.80 | 3.88 | 2.89 | 3.83 | 2.84 | 22.0 |
| 100/63 |
| 2.48 | 3.88 | 2.58 | 3.82 | 2.52 | 26.3 |
| 100/56 |
| 2.20 | 3.88 | 2.31 | 3.81 | 2.24 | 28.4 |
|
|
|
|
|
|
|
|
| 106/80 | 4.17 | 3.15 | 4.11 | 3.25 | 4.06 | 3.20 | 21.7 |
| 106/71 |
| 2.80 | 4.11 | 2.89 | 4.06 | 2.84 | 27.3 |
| 106/63 |
| 2.48 | 4.11 | 2.59 | 4.04 | 2.52 | 31.6 |
| 106/56 |
| 2.20 | 4.11 | 2.32 | 4.04 | 2.24 | 35.0 |
| 112/90 | 4.41 | 3.54 | 4.34 | 3.64 | 4.30 | 3.60 | 20.3 |
| 112/80 |
| 3.15 | 4.34 | 3.25 | 4.29 | 3.20 | 27.3 |
| 112/71 |
| 2.80 | 4.34 | 2.90 | 4.28 | 2.84 | 32.8 |
| 112/63 |
| 2.48 | 4.34 | 2.59 | 4.27 | 2.52 | 37.2 |
|
|
|
|
|
|
|
|
| 118/90 | 4.65 | 3.54 | 4.57 | 3.65 | 4.52 | 3.60 | 26.2 |
| 118/80 |
| 3.15 | 4.57 | 3.26 | 4.51 | 3.20 | 33.2 |
| 118/71 |
| 2.80 | 4.57 | 2.91 | 4.51 | 2.84 | 38.7 |
| 118/63 |
| 2.48 | 4.57 | 2.60 | 4.50 | 2.52 | 43.1 |
|
|
|
|
|
|
|
|
| 125/100 | 4.92 | 3.94 | 4.85 | 4.04 | 4.80 | 4.00 | 25.7 |
| 125/90 |
| 3.54 | 4.85 | 3.65 | 4.79 | 3.60 | 33.5 |
| 125/80 |
| 3.15 | 4.85 | 3.26 | 4.78 | 3.20 | 40.5 |
| 125/71 |
| 2.80 | 4.85 | 2.91 | 4.77 | 2.84 | 46.0 |
|
|
|
|
|
|
|
|
| 132/106 | 5.20 | 4.17 | 5.12 | 4.28 | 5.07 | 4.24 | 28.2 |
| 132/90 |
| 3.54 | 5.12 | 3.66 | 5.06 | 3.60 | 41.1 |
| 132/80 |
| 3.15 | 5.12 | 3.27 | 5.04 | 3.20 | 48.0 |
| 132/71 |
| 2.80 | 5.12 | 2.92 | 5.04 | 2.84 | 53.6 |
|
|
|
|
|
|
|
|
| 140/112 | 5.51 | 4.41 | 5.43 | 4.53 | 5.38 | 4.48 | 32.1 |
| 140/100 |
| 3.94 | 5.43 | 4.06 | 5.37 | 4.00 | 42.5 |
| 140/90 |
| 3.54 | 5.43 | 3.67 | 5.36 | 3.60 | 50.3 |
| 140/80 |
| 3.15 | 5.43 | 3.28 | 5.35 | 3.20 | 57.3 |
|
|
|
|
|
|
|
|
| 150/125 | 5.91 | 4.92 | 5.81 | 5.04 | 5.77 | 5.00 | 31.9 |
| 150/106 |
| 4.17 | 5.81 | 4.30 | 5.75 | 4.24 | 49.9 |
| 150/95 |
| 3.74 | 5.81 | 3.87 | 5.74 | 3.80 | 58.9 |
| 150/80 |
| 3.15 | 5.81 | 3.29 | 5.72 | 3.20 | 67.9 |
|
|
|
|
|
|
|
|
| 160/132 | 6.30 | 5.20 | 6.20 | 5.33 | 6.15 | 5.28 | 37.8 |
| 160/112 |
| 4.41 | 6.20 | 4.55 | 6.13 | 4.48 | 57.7 |
| 170/140 | 6.69 | 5.51 | 6.59 | 5.65 | 6.54 | 5.59 | 42.9 |
| 170/130 |
| 5.12 | 6.59 | 5.26 | 6.53 | 5.2 | 53.9 |
| 170/118 |
| 4.65 | 6.59 | 4.79 | 6.52 | 4.72 | 66.1 |
|
|
|
|
|
|
|
|
| 180/150 | 7.09 | 5.91 | 6.98 | 6.05 | 6.93 | 6 | 46 |
| 180/140 |
| 5.51 | 6.98 | 5.66 | 6.92 | 5.59 | 57.9 |
| 180/125 |
| 4.92 | 6.98 | 5.07 | 6.9 | 5 | 73.9 |
|
|
|
|
|
|
|
|
| 190/160 | 7.48 | 6.3 | 7.37 | 6.45 | 7.31 | 6.39 | 49.1 |
| 190/150 |
| 5.91 | 7.37 | 6.06 | 7.3 | 6 | 61.8 |
| 190/132 |
| 5.2 | 7.37 | 5.35 | 7.29 | 5.28 | 82.7 |
|
|
|
|
|
|
|
|
| 200/160 | 7.87 | 6.3 | 7.76 | 6.46 | 7.69 | 6.39 | 65.6 |
| 200/150 |
| 5.91 | 7.76 | 6.07 | 7.69 | 6 | 78.6 |
| 200/140 |
| 5.51 | 7.76 | 5.68 | 7.67 | 5.59 | 90 |
|
|
|
|
|
|
|
|
| 212/170 | 8.35 | 6.69 | 8.22 | 6.86 | 8.16 | 6.8 | 73.2 |
| 212/130 | 5.12 | 8.22 | 5.3 | 8.12 | 5.2 | 122.3 |
|
|
|
|
|
|
|
|
|
| 224/180 | 8.82 | 7.09 | 8.69 | 7.26 | 8.62 | 7.19 | 81.3 |
| 224/140 |
| 5.51 | 8.69 | 5.7 | 8.58 | 5.59 | 133.7 |
|
|
|
|
|
|
|
|
| 236/190 | 9.29 | 7.48 | 9.15 | 7.66 | 9.08 | 7.59 | 89.4 |
| 236/150 |
| 5.91 | 9.15 | 6.1 | 9.04 | 6 | 145.1 |
|
|
|
|
|
|
|
|
| 250/200 | 9.84 | 7.87 | 9.69 | 8.07 | 9.62 | 7.99 | 102.8 |
| Guaranteed component sizes | Tolerances |
|---|
| The indicated dimensions after finish machining apply to lengths of maximum 2.5 x dy. For longer lengths, the finish machining dimensions must be calculated individually. This calculation requires data about finished dimension, straightness requirements, manufacturing procedure and sizes chucked true to the o.d. or i.d. | Outer diameter: +2/–0%, with a minimum of +0.039/–0 in.Inner diameter: +0/–2%, with a minimum of +0/–0.039 in. |
