3″ – 12″ USE I.D. SLIP-ON
14″ – 36″ USE I.D. REGULAR
3″ – 12″ SLIP-ON – SEE TABLE BELOW
14″ – 36″ SLIP-ON – USE I.D. REGULAR
3″ – 12″ UTILISER D.I.
COULISSANTES
14″ – 36″ UTILISER
D.I. RÉGULIERES
3″ – 12″ COULISSANTES – VOIR TABLEAU PLUS BAS
14″ – 36″ COULISSANTES – UTILISER D.I.
RÉGULIERES
DIA.(NOM.) IN / PO 3 4 5 6 8 10 12
mm 75 100 125 150 200 250 300
iNSIDE DIA.
DIA.
INTERIEUR
IN / PO 9 10 11 13½ 16 19
mm 190 229 254 279 343 407 483
IN /
PO
4 1/8 5 1/8 6 1/8 11 3/8 13 3/8
mm 105 130 156 184 235 289 340
T1 IN /
PO
5/8 5/8 5/8 5/8 5/8 5/8 3/4
mm 15.9 15.9 15.9 15.9 15.9 15.9 19
T2 IN / PO 3/4 3/4 3/4 3/4 3/4 1 1
mm 19 19 19 19 19 25.4 25.4
T3 IN / PO 3/4 3/4 3/4 3/4 7/8 1
mm 19 19 19 19 22.2 25.4 31.7
NUMBER OF
BOLTS
NOMBRE DE BOULONS
4 8 8 8 8 12 12
BOLT CIRCLE DIA.,C.
DES BOULONS
IN / PO 6 11¾ 14¼ 17
mm 152 190 216 241 298 362 432
DIA. OF HOLES,
DIA. DES TROUS
IN / PO 3/4 3/4 7/8 7/8 7/8 1 1
mm 19 19 22.2 22.2 22.2 25.4 25.4
WEIGHT ( T1 ),
POIDS ( T1 )
LB 5.2 6.6 7.5 8.8 12.6 16.4 29.2
kg 2.4 3.0 3.4 4 5.7 7.4 13.2
WEIGHT ( T2 )
,POIDS ( T2 )
LB 6 8.2 8.5 10.4 15.2 26.2 39
kg 2.7 3.7 3.9 4.7 6.9 11.9 17.7
LB 6 8.2 8.5 10.4 20.0 26.2 48.4
kg 2.7 3.7 3.9 4.7 9.1 11.9 22.0

Notes:

  1. Material: T2, mild steel.T1, T3, A516 Gr. 70 upon request.
  2. Drilling: ASME B16.5 CL. 150.
  1. Matériau: T2, acier doux. T1, T3, A516 Gr.70. sur demande seulement.
  2. Perçage: ASME B16.5 CL. 150.