INSIDE DIA WALL / MUR 90° 45°
DIA.
INTÉRIEUR
A WEIGHT /
POIDS
B WEIGHT /
POIDS
INCHES,POUCES mm INCHES,POUCES mm INCHES,POUCES mm lb kg INCHES,POUCES mm lb kg
38 0.078 2 2-¼ 57 0.4 0.2 15/16 24 0.2 0.1
0.125 3.2 0.4 0.2 0.2 0.1
2 50 0.078 2 3 76 0.6 0.3 1-¼ 32 0.4 0.1
0.125 3.2 1.2 0.6 0.6 0.3
64 0.078 2 3-¾ 95 1.1 0.5 1-9/16 40 0.6 0.3
0.125 3.2 1.7 0.8 0.9 0.4
3 76 0.078 2 4-½ 114 1.6 0.7 1-7/8 48 0.8 0.4
0.125 3.2 2.5 1.1 1.2 0.4
4 102 0.078 2 6 152 3 1.5 2-½ 64 1.5 0.7
0.125 3.2 4.6 2.1 2.3 1
5 127 0.078 2 7-½ 191 4.1 1.9 3-1/8 79 2 0.9
0.125 3.2 6.6 3 3.3 1.5
6 152 0.078 2 9 229 6 2.7 3-¾ 95 3 1.4
0.125 3.2 9.9 4.5 4.9 2.2
8 203 0.078 2 12 305 10.6 4.8 5 127 5.3 2.4
0.125 3.2 17 7.7 8.5 3.8
10 254 0.109 2.8 15 381 23 10.4 6-¼ 158 11.5 5.2
0.125 3.2 26.7 12.2 13.5 6.1
12 305 0.109 2.8 18 457 34.6 15.7 7-½ 190 17.3 7.8
0.125 3.2 38.3 17.4 19.2 8.7
14 356 0.125 3.2 21 533 52.5 23.8 8-¾ 221 26.3 11.9
0.187 4.7 77.5 35.2 38.8 17.6
16 406 0.125 3.2 24 610 68 30.9 10 253 34 15.4
0.187 4.7 101 45 50.5 22.9
0.125 3.2 96.4 43.7 48.2 21.9
18 457 0.187 4.7 27 686 128 58.2 11-¼ 285 64 29
0.25 6.3 171 77.6 85.5 38.8
0.14 3.6 121 55 60.5 27.5
20 508 0.187 4.7 30 762 158 71.7 12-½ 316 79 35.8
0.25 6.3 211 95.5 105 47.6
24 610 0.187 4.7 36 914 234 106 15 379 117 53.1
0.25 6.3 312 142 156 70.8

Notes:

  1. Wall thickness tolerance to ASTM A 774.
  2. Material: Stainless steel 304L – 316L – 317L. Other alloys available upon request.
  3. For maximum working pressure see technical section.
  4. Diameters & thicknesses other than shown available on request.
  1. Tolérance des murs selon ASTM A 774.
  2. Matériau: acier inoxydable 304L – 316L – 317L. Autres alliages disponibles sur demande.
  3. Pour pression maximale voire section technique.
  4. Diamètres et epaisseurs autres que montrés, disponibles sur demande.