IMPERIAL UNITS

UNITÉS IMPÉRIALES

DIA.(NOM.) O.D I.D T1 T2 T3 A B C WEIGHT/POIDS
D.E D.I T1 T2 T3
1 ½ 5 2 5/8 ¾ ¾ 3 7/8 4 5/8 3.0 3.6 3.6
2 6 2 ½ 5/8 ¾ ¾ 4 ¾ 4 ¾ 3.9 4.7 4.7
2 ½ 7 3 5/8 ¾ ¾ 5 ½ 4 ¾ 5.2 6.2 6.2
3 7
½
3 5/8 5/8 ¾ ¾ 6 4 ¾ 5.9 7.1 7.1
4 9 4 5/8 5/8 ¾ ¾ 7 ½ 8 ¾ 7.9 9.5 9.5
5 10 5 5/8 5/8 ¾ ¾ 8 ½ 8 7/8 8.9 10.7 10.7
6 11 6 5/8 5/8 ¾ ¾ 9 ½ 8 7/8 10.3 12.3 12.3
8 13 ½ 8 5/8 5/8 ¾ 7/8 11 ¾ 8 7/8 14.7 17.7 20.6
10 16 10 ¾ ¾ 1 1 14 ¼ 12 1 18.9 30.2 30.2
12 19 12 ¾ ¾ 1 1
¼
17 12 1 32.7 43.5 54.4
14 21 14 ¾ ¾ 1 1/8 1 ¼ 18 ¾ 12 1 1/8 36.6 55.0 78.6
16 23 ½ 16 ¾ ¾ 1 1/8 1 ½ 21 ¼ 16 1 1/8 44.0 66.0 88.3
18 25 18 ¾ 1 1 ¼ 1 ½ 22 ¾ 16 1 ¼ 48.8 81.4 97.6
20 27 20 7/8 1 1 ¼ 1 5/8 25 20 1 ¼ 69.0 86.3 112.0
24 32 24 7/8 1 1 3/8 2 29 ½ 20 1 3/8 88.0 121.0 176.0
30 39 31 1 1 1/2 2 3/8 36 28 1 3/8 117.0 176.0 279.0
36 46 37 1 1 1/2 2 7/8 42 ¾ 32 1 5/8 158.0 237.0 454.0

 

SI UNITS

UNITÉS SI

DIA.(NOM.) O.D I.D T1 T2 T3 A B C WEIGHT/POIDS
D.E D.I T1 T2 T3
38 127 51 15.9 19.0 19.0 98 4 15.9 1.4 1.6 1.6
50 152 63 15.9 19.0 19.0 121 4 19.0 1.8 2.1 2.1
64 178 76 15.9 19.0 19.0 140 4 19.0 2.4 2.8 2.8
76 191 92 15.9 19.0 19.0 152 4 19.0 2.7 3.2 3.2
102 229 117 15.9 19.0 19.0 190 8 19.0 3.6 4.3 4.3
127 254 143 15.9 19.0 19.0 216 8 22.2 4.0 4.9 4.9
152 279 168 15.9 19.0 19.0 241 8 22.2 4.7 5.6 5.6
203 343 219 15.9 19.0 22.2 298 8 22.2 6.7 8.0 9.4
254 407 273 19.0 25.4 25.4 362 12 25.4 8.6 13.7 13.7
305 483 324 19.0 25.4 31.7 432 12 25.4 14.8 19.7 24.7
356 534 375 19.0 28.6 31.7 476 12 28.6 16.6 25.0 35.7
406 597 425 19.0 28.6 38.1 540 16 28.6 20.0 29.9 40.1
457 635 476 25.4 31.7 38.1 578 16 31.7 22.1 36.9 44.4
508 699 530 25.4 31.7 41.2 635 20 31.7 31.3 39.1 50.9
610 813 632 25.4 34.9 51.0 749 20 34.9 39.9 44.9 80.2
762 985 787 25.4 38.1 60.3 914 28 34.9 53.1 79.8 126.7
914 1169 940 25.4 38.1 73.0 1086 32 41.3 71.7 107.5 206.5

Notes:

  1. Material: T1, T2 mild steel, T3 A516 Gr. 70.
  2. Drilling: ASME B16.5 CL. 150.
  3. For maximum working pressure see technical section.
  4. Finish: Galvanized.
  5. T1 available on request only.
  1. Matériau: T1, T2 acier doux, T3 A516 Gr. 70.
  2. Perçage: ASME B16.5 CL. 150.
  3. Pour pression maximale voir section technique.
  4. Fini: Galvanisé.
  5. Epaisseur T1 sur demande seulement.