I.D. SMOOTH-FLOW GAUGE ELBOWS

90°

Inside. Dia. Wall
Thickness
U.S.S. Gauge    A Weight (Lb/Ln.Ft.)
1-1/2 0.078 14 2-1/4 0.4
0.125 11 2-1/4 0.4
2 0.078 14 3 0.6
0.125 11 3 1.2
2-1/2 0.078 14 3-3/4 1.1
0.125 11 3-3/4 1.7
3 0.078 14 4-1/2 1.6
0.125 11 4-1/2 2.5
4 0.078 14 6 3.0
0.125 11 6 4.6
5 0.078 14 7-1/2 4.1
0.125 11 7-1/2 6.6
6 0.078 14 9 6.0
0.125 11 9 9.9
8 0.078 14 12 10.6
0.125 11 12 17.0
10 0.109 12 15 23.0
0.125 11 15 26.7
12 0.109 12 18 34.6
0.125 11 18 38.3
14 0.125 11 21 52.5
0.187 3/16 21 77.5
16 0.125 11 24 68.0
0.187 3/16 24 101.0
18 0.125 11 27 96.4
0.187 3/16 27 128.0
0.250 1/4 27 171.0
20 0.140 11 30 121.0
0.187 3/16 30 158.0
0.250 1/4 30 211.0
24 0.187 3/16 36 234.0
0.250 1/4 36 312.0

45°

Inside. Dia. Wall
Thickness
U.S.S. Gauge B Weight (Lb/Ln.Ft.)
1-1/2 0.078 14 15/16 0.2
0.125 11 15/16 0.2
2 0.078 14 1-1/4 0.4
0.125 11 1-1/4 0.6
2-1/2 0.078 14 1-9/16 0.6
0.125 11 1-9/16 0.9
3 0.078 14 1-7/8 0.8
0.125 11 1-7/8 1.2
4 0.078 14 2-1/2 1.5
0.125 11 2-1/2 2.3
5 0.078 14 3-1/8 2.0
0.125 11 3-1/8 3.3
6 0.078 14 3-3/4 3.0
0.125 11 3-3/4 4.9
8 0.078 14 5 5.3
0.125 11 5 8.5
10 0.109 12 6-1/4 11.5
0.125 11 6-1/4 13.5
12 0.109 12 7-1/2 17.3
0.125 11 7-1/2 19.2
14 0.125 11 8-3/4 26.3
0.187 3/16 8-3/4td> 38.8
16 0.125 11 10 34.0
0.187 3/16 10 50.5
18 0.125 11 11-1/4 48.2
0.187 3/16 11-1/4 64.0
0.250 1/4 11-1/4 85.5
20 0.140 11 12-1/2 60.5
0.187 3/16 12-1/2 79.0
0.250 1/4 12-1/2 105.0
24 0.187 3/16 15 117.0
0.250 1/4 15 156.0

All dimensions in inches Material: ASTM A-240 types 304, 304L, 316 and 316L. Welding: Automatic PAW or GTAW with filler metal added. All elbows are pickled and washed. For flanged smooth flow elbows dimensions A and B will increase by depth of van-stone neck (see pages A-9 and A-11, Dim. C).

 

I.D. GAUGE WELDING FITTINGS STANDARD DIMENSIONS

Inside Dia. L R 90° ELL S R 90° ELL L R 45°ELL Tee Cross Reducer Lateral
A B C D E F G H
1-1/2 6 4 2-1/4 4 4-1/2 7 2 9
2 6-1/2 4-1/2 2-1/2 4-1/2 5 8 2-1/2 10-1/2
2-1/2 7 5 3 5 5-1/2 9-1/2 2-1/2 12
3 7-3/4 5-1/2 3 5-1/2 6 10 3 13
4 9 6-1/2 4 6-1/2 7 12 3 15
5 10-1/4 7-1/2 4-1/2 7-1/2 8 13-1/2 3-1/2 17
6 11-1/2 8 5 8 9 14-1/2 3-1/2 18
8 14 9 5-1/2 9 11 17-1/2 4-1/2 22
10 16-1/2 10 6-1/2 11 12 20-1/2 5 25-1/2
12 19 11 7-1/2 12 14 24-1/2 5-1/2 30
14 21-1/2 12 7-1/2 14 16 27 6 33
16 24 15 8 15 18 30 6-1/2 36-1/2
18 26-1/2 16-1/2 8-1/2 16-1/2 19 32 7 39
20 29 18 9-1/2 18 20 35 8 43
24 34 22 11 22 24 40-1/2 9 49-1/2
30 41-1/2 25 15 25 30 49 10 59
36 49 28 18 28 36 58 14 72
All dimensions in inchesDimensions: As per ANSI B16.1 class 125. Material: ASTM A-240 types 304, 304L, 316 and 316L. Welding: Longitudinal, Automatic PAW or GTAW with or
without filler metal or GMAW. For flanged fittings the above dimensions remain unchanged. Fittings are pickled and washed.

 

I.D. PRESSED VAN-STONES

 

Inside Dia. Outside Dia. Depth Thickness (U.S.S. Ga.) Weight
A B C T
1-1/2 3 5/8 11 (0.125”) 0.2
2 3-1/2 5/8 11 (0.125”) 0.3
2-1/2 4-1/2 5/8 11 (0.125”) 0.4
3 5-1/8 5/8 11 (0.125”) 0.6
4 6-1/2 5/8 11
(0.125”)
0.9
5 7-1/2 5/8 11 (0.125”) 1
6 8-1/2 5/8 11 (0.125”) 1.3
8 10-5/8 5/8 11 (0.125”) 1.8
10 13 5/8 11 (0.125”) 2.4
12 15 5/8 11 (0.125”) 3.5
14 17-1/2 5/8 11
(0.125”)
4
16 19-3/4 5/8 11 (0.125”) 5

All dimensions in inches

Material: ASTM A-240 types 304, 304L, 316 and 316L.
Recommended max. working pressure: 150 PSI at 200°F.

 

I.D. PRESSED VAN-STONES

 

Inside Dia. Outside Dia. Depth Thickness Weight (Lb)
A B C T
3 4-1/2 3/4 1/8 0.6
4 6 1 1/8 0.8
5 7 1 1/8 1
6 8 1 1/8 1.5
8 10-1/2 1-1/4 1/8 2.4
10 13 1-1/2 1/8 3.7
12 15 1-1/2 1/8 4.3
14 17 1-1/2 1/8 5
16 19 1-1/2 3/16 8.4
18 21 1-1/2 3/16 9.4
20 23 1-1/2 3/16 10.3
24 28 2 3/16 15.8
24 28 2 1/4 21
30 34 2 1/4 25.7
36 40 2 1/4 31.4

All dimensions in inches

Material: Stainless steel angle types 304, 304L, 316 and 316L.
Recommended max. working pressure: Up to 24” dia.: 150 PSI at 200°F.