I.D. STUB-END TYPE “B”

Inside Diameter Outside Diameter Wall Thickness Length
I.D. O.D. T L Weight
INCHES mm INCHES mm INCHES mm INCHES mm LB kg
6 152 8-1/2 216 0.125 3.18 3-1/2 89 3.4 1.54
8 203 10-5/8 270 0.125 3.18 4 102 5 2.27
10 254 12-3/4 324 0.125 3.18 5 127 7.5 3.4
12 305 15 381 0.125 3.18 6 152 10.5 4.76
14 356 16-1/4 413 0.14 3.58 6 152 12.9 5.85
16 406 18-1/2 470 0.187 4.75 6 152 19.5 8.84
18 457 21 533 0.187 4.75 6 152 22.8 10.34
20 508 23 584 0.25 6.35 6 152 33.5 15.2
24 610 27-1/4 692 0.25 6.35 6 152 40.9 18.55
30 762 33-3/4 857 0.312 7.92 6 152 65.4 29.66
36 914 40-1/4 1022 0.375 9.52 6 152 96.5 43.77
  1. “T” not less than “t”.
  2. Lap is machined on both sides, gasket face standard serrated.
  3. Bevel machining only on wall thicknesses exceeding 3.18 mm.
  4. Heat-treating on request.
  5. Lengths other than shown can be supplied.

 

Material: ASTM A240 types, 304, 304L, 316 and 316L.
Welding: Automatic Paw or GTAW with or without filler metal or GMAW. All stub-ends are pickled and washed.
NOTE: FABRICATED IN INCHES.