CLEAN OUT(I.D. AND N.P.S.)
PLUG TYPE

The cover of this type of clean-out is provided with snugly fitting plug.

The inside of the pipe, with plug in place, provides smooth bore eliminating stock hang-up.

Nominal SizeDia.H
mminchmminchmminch
10041626-3/8702-3/4
1506212.78-3/8702-3/4

 

Material: ASTM A-240 types 304L and 316L (stub and plug).

 CLEAN OUT(I.D. AND N.P.S.)
QUICK OPEN TYPE

Quick opening clean-out as shown was introduced by Douglas Bros. several years ago, and since then, thousands have been installed in Paper Mills.

It is ideally suited for welding at the end of the pipe-run or on elbows, providing quick and easy access for inspection and cleaning.

 

NOM Inside Dia.Overall HeightWeight
mminchesmmincheskglbs
10042228-3/45.91/13/1900
15062389-3/89.11/20/1900
200826710-1/212.728
2501033613-1/415.534
3001237114-5/82044

 DIAMOND CLEAN-OUT AND INSPECTION PORT

 

Size
inmmFor Installation
In
61506”90° and 45° Long Sweep Elbows (150 mm)
82008”90° and 45° Long Sweep
Elbows (200 mm)
1025010”90° and 45° Long Sweep Elbows (250 mm)

Deluxe Model Features

  • Jacking arrangement to force cover down to facilitate opening action in the event of an obstruction directly behind cover.

 

Diamond Clean-out Features

  • Smooth inner surface ”“ no obstruction.
  • Access in two directions.
  • Opening size (5-1/2” x 3-3/4” ”“ 140 mm x 95 mm) large enough for hand, hose or mechanical cleaning device.
  • Self-sealing with internal pressure.
  • Quick & easy visual access into piping system.
  • All components made of corrosion-resistant material.
  • No special tools required to open.
  • No loose parts.
  • Minimize down time.

 

 DIAMOND CLEAN-OUT AND INSPECTION PORT

 

For Installation In

Size90° ELLs45° ELLsReducersTube & Pipe
4 Fits4466
6
Fits
668 & 108 & 10
8 Fits8812 thru 1612 thru 16
10 Fits101018 thru 2218 thru 22
12 Fits21
thru 18
21 thru 1824 & Larger24 & Larger

 

* 4” size requires special trimming on all items except 4” tube size elbows.

* 4” size requires special trimming on all items except 4” tube size elbows.

Note: 12” size also fits tanks and vessels.

 

Installation Instructions

  • Remove the cover from the frame. Place frame in position on pipe and mark the outside contour. Cut desired opening approximately 1/4” inside line and tack weld the frame in position.
  • Heliarc weld inside and grind weld smooth. Weld the outside of the frame, let cool and insert cover.
  • Cover must be removed to prevent damage to O ring during welding.
  • Note: Clean-outs are designed for installation in 90° ELLs and therefore require slight dressing when installing in straight pipe, reducers, tanks or vessels.

Manufactured From Type 316 Stainless Steel

The Clean-out Consists of the Following Parts:

  • Safety chain to prevent loss of components.
  • Nickel bronze wing nut to ensure easy operation and prevent galling of thread.
  • Nickel bronze cast yoke.
  • Stainless steel cover and stud complete with neoprene ”œO” ring.
  • Stainless steel mounting frame.

 

Size90° ELLs45° ELLsReducersTube
& Pipe
100 mm100100150150
150 mm150150200 & 250200 & 250
200 mm200200300 to 400300 to 400
250 mm250250450 to
550
450 to 550
300 mm300 to 450300 to 450600 &
larger
600 & larger

Approximate opening all sizes 4-3/4” x 2-3/4” (120 mm x 70 mm)

Approximate shipping weight 6 pounds (2.7 kg).